Views: 6 Author: Catherine Cheung Email:email@example.com Publish Time: 2017-08-31 Origin: Catherine Cheung Email:firstname.lastname@example.org Inquire
Automatic fence mesh welding machine supplier
Our Advantage of Automatic fence mesh welding machine supplier:
1. We have more than 12 years of experience producing chain link machine. The machine can running very well.
2. You can use our machine directly once you get electricity. No need to connect wires or adjust the machine. Which can save your time and overseas service cost.
3. We use Servo Motor on the machine. As result, the machine can running very fast and lso you can adjust many things through the PLC.
4. We using big and thick frame tube on the machine. Moveover, E-coating will be used as the machine surface finish. As a result, the machine produced by us is very strong and realy beautiful.
Features of Automatic fence mesh welding machine supplier:
1. This machine is designed as reinforced gantry structure with the advantage of high rigidity and stable running.
2. The welding power is designed with medium frequency inverter power supply system with the features of electricity and energy saving.
3. The machine is equipped with 6 sets of welding head and 6 sets of power supply systems. The welding current of each single point could be adjusted independently in order to ensure the reliability of welding spot.
4. For the sake of increasing the output efficiency, it is designed as double-layer feeder for cycle running. When one feeder is under welding process, another feeder could be loaded with material.
5. Automatic stepping welding. Servo motor will drive the stepping belt to ensure the accuracy of stepping position.
6. Automatic demolding device: after welding the product, the demolding cylinder will jet up for preparation of automatic unloading.
7. Automatic unloading device will grab the product via servo motor control. It will move down to grab the welded product and moving to the setting position via servo motor. It helps to reduce labor force and lower labor intensity. It is designed as 90° rotation of unloading feeder for the convenience of transportation of welded product. the demolding cylinder will jet up for preparation of automatic unloading.
Welcome you to contact us to get our machine photoes or videos.