Views: 13 Author: Site Editor Publish Time: 2017-04-24 Origin: Site Inquire
♣ Chain Link Fencing Machine Technical Description
Chain link fencing machine for manufacturing chain link fences of different sizes.
The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
♣ Suitable wire to the chain link fencing machine:
High-quality low carbon steel wire, Galvanized steel wire,Stainless steel wire, Aluminum alloy wire, Aluminum-clad steel wire.
|
♣ Technical parameters fo the chain link fencing machine
wire diameter | 2.0-4.5mm |
mesh size | 30-100mm |
material | galvanized wire， pvc wire |
width | 3m |
knuckle or twist | Both ok |
capacity | 60-120M2/h |
voltage | 380V，50HZ |
motor | 5.5 kw（main motor） 2.2kw （cut wire motor） 1.5kw（knuckle wire part） 0.75kw （rolling part motor） |
type | fully automatic |
If you have any inquiry about our Chain link fencing machine, welcome to contact us:
Anne Cao
Phone:+8618032888775
Email:sales08@fence-machine.com
