 |
| Quantity: | |
|---|---|
Mechanical Reinforcing Mesh Welding Machine
The mechanical reinforcing mesh production line is mainly used for producing construction reinforcing meshes.
Feeding mode: warps and wefts required by the equipment are pre-sheared by an automatic straightening cutting machine,
the warps are placed on a corresponding wire penetrating mold by workers, and the wefts are placed into a special
accommodation groove and are controlled for automatic blanking through a servo motor.
Welding: The main machine starts welding: the machine adopts a synchronous control technology, both branch control
welding time and welding time are controlled by a PLC digital programming system, and the pore size can be adjusted
only by direct input on a touch screen control panel; a welding process is finished on the basis of spring pressurization.
Welding finish: The servo motor controls an automatic mesh drawing process until the whole mesh is welded,
and the automatic mesh connecting and discharging system is started; the welding of the next mesh is started.
Mechanical Reinforcing Mesh Panel Welding Machine Technical parameters
| Wire diameter | 6mm-12mm | Warp feeding | Pre-shearing |
| Weft distance | Min 50mm | Weft feeding | Pre-shearing |
| Warp distance | 100mm-300mm | Power supply | AC380V-440V |
| Warp quantity | 26 | Welding width | 2500mm |
| Mesh length | 6m | Welding speed | 45 times∕min |
| Dimensions | 10*3.4*1.6（m） |
The above parameters can be customized according to customer requirements.
Auxiliary Equipment：
Mechanical Reinforcing Mesh Welding Machine
The mechanical reinforcing mesh production line is mainly used for producing construction reinforcing meshes.
Feeding mode: warps and wefts required by the equipment are pre-sheared by an automatic straightening cutting machine,
the warps are placed on a corresponding wire penetrating mold by workers, and the wefts are placed into a special
accommodation groove and are controlled for automatic blanking through a servo motor.
Welding: The main machine starts welding: the machine adopts a synchronous control technology, both branch control
welding time and welding time are controlled by a PLC digital programming system, and the pore size can be adjusted
only by direct input on a touch screen control panel; a welding process is finished on the basis of spring pressurization.
Welding finish: The servo motor controls an automatic mesh drawing process until the whole mesh is welded,
and the automatic mesh connecting and discharging system is started; the welding of the next mesh is started.
Mechanical Reinforcing Mesh Panel Welding Machine Technical parameters
| Wire diameter | 6mm-12mm | Warp feeding | Pre-shearing |
| Weft distance | Min 50mm | Weft feeding | Pre-shearing |
| Warp distance | 100mm-300mm | Power supply | AC380V-440V |
| Warp quantity | 26 | Welding width | 2500mm |
| Mesh length | 6m | Welding speed | 45 times∕min |
| Dimensions | 10*3.4*1.6（m） |
The above parameters can be customized according to customer requirements.
Auxiliary Equipment：
