Views: 9 Author: hannah Publish Time: 2016-08-26 Origin: www.fence-machine.com Inquire
introduction of diamond mesh making machine
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
specification of diamond mesh making machine
| Product Name | Automatic Chain Link Fence Machine |
| Function | Chain Link Fencing is extensively used as fences for playground and gardens, super highway, railway, airport, port, residence, etc. |
| Wire Diameter(mm) | 1.8-4.0mm Feeding Wire numbers:two(Note:Steel Wire Standard:GB3081-82) |
| Mesh Size(mm) | 25x25-100x100 |
| Netting width(mm) | 600--4000 |
| Capacity(m2/hour) | 60-120 |
| Rated Voltage | 380V,50HZ |
| Motor Power | 9.0KW |
| Weight (T) | 4.2 |
| Outside Size | 7000*1430* 1800mm, 5000*1700* 1250mm |
| Electric System | 1. The machine is controlled by PLC automatic controller 2. Germany Siemens PLC origin 3. The inverter is selected from high quality products 4. Of Japan”YASKAWA” 5. Low-voltage electrical from Germany Schneider 6. Electric&Machinery from Taiwan Teco Electric 7. Electrical 8. Clutch from Taiwan YA CO,.LTD. |
 |  |
 |  |
