+86-15303230155 （With WhatsApp)
English 
 |
Main machine
Description
1. Both of the longitude wire and cross wire are fed from wire coils automatically.
2. The raw material is suitable for black wire, galvanized wire or stainless steel wire.
3. The middle cutter and sider cutters can be adjusted randomly to make two mesh rolls at same time.
4. The mesh roll length can be set by counter switch on the control panel.
5. The welding transformers have 8 degrees and can be adjusted for different wire diameters.
6. The welding time and welding current can be adjusted on the control panel to guarantee welding solid.
7. It has advantages such as reasonable design, low noise, stable working, easier operation and elector-magnetism speed adjustment.
Parameters
Type | CR-DWU-1 | CR-DWU-2 | CR-DWU-3 |
Wire diameter | 0.4-0.65mm | 0.65-1.8mm/0.8-2mm | 1.0-2.2mm/1.2-2.5mm |
Aperture/pitch | 1/4", 1/2" | 1/2", 1", 2", 3", 4" | 1", 2", 3", 4" |
Mesh width | Max.1m, 1.2m | Max.1.2m,1.5m, 2m | Max.1.2m, 1.5m, 2m, 2.5m |
Motor | 2.2kw | 2.2kw; 4kw | 4kw; 5.5kw |
Welding speed | Max.75 rows/min | Max.120-180 rows/min | Max.80-120 rows/min |
Transformer | 50kva*3 | 60kva*4;60kva*5, 60kva*7 | 70kva/80kva*5/6/7/8 |
Weight | 1.5T | 2T, 2.5T | 2T, 2.5T, 3T, 3.5T |
Machine Advantage
1. Separate control
Our machine adopts separate control technology, 1 switch, 1 SCR and 1 electric board controls 2pcs welding transformers, making the welding transformers working separately to reduce the capacity requirement of power transformer, reduce the impact current.
2. About the welding transformers
We use sealed air cooling welding transformer or water cooling welding transformers(high temperature countries), with copper inside, the scrap&slag won’t fly in easily while welding. Old type machine use no sealed welding transformers, with aluminum inside, easily burned.
3. About the button&speed meter
Our machine designed new position for the button&speed meter. It adopts Delta variable-frequency which can adjust frequency and save energy. They will not broken easily like before and be much easier to operate now.
Auxiliary Equipment
1. Mesh repairing table, 1 set
Usage: coincide with the mesh repairing machine and to hold the re-weld mesh | 2. Mesh repairing machine, 1 set
Usage: re-weld the points who was miss with misoperation situatio welding |
3. Bobbin stand-off, 1 set
| 4. Wire rolling machine, 1 set
|
Main machine
Description
1. Both of the longitude wire and cross wire are fed from wire coils automatically.
2. The raw material is suitable for black wire, galvanized wire or stainless steel wire.
3. The middle cutter and sider cutters can be adjusted randomly to make two mesh rolls at same time.
4. The mesh roll length can be set by counter switch on the control panel.
5. The welding transformers have 8 degrees and can be adjusted for different wire diameters.
6. The welding time and welding current can be adjusted on the control panel to guarantee welding solid.
7. It has advantages such as reasonable design, low noise, stable working, easier operation and elector-magnetism speed adjustment.
Parameters
Type | CR-DWU-1 | CR-DWU-2 | CR-DWU-3 |
Wire diameter | 0.4-0.65mm | 0.65-1.8mm/0.8-2mm | 1.0-2.2mm/1.2-2.5mm |
Aperture/pitch | 1/4", 1/2" | 1/2", 1", 2", 3", 4" | 1", 2", 3", 4" |
Mesh width | Max.1m, 1.2m | Max.1.2m,1.5m, 2m | Max.1.2m, 1.5m, 2m, 2.5m |
Motor | 2.2kw | 2.2kw; 4kw | 4kw; 5.5kw |
Welding speed | Max.75 rows/min | Max.120-180 rows/min | Max.80-120 rows/min |
Transformer | 50kva*3 | 60kva*4;60kva*5, 60kva*7 | 70kva/80kva*5/6/7/8 |
Weight | 1.5T | 2T, 2.5T | 2T, 2.5T, 3T, 3.5T |
Machine Advantage
1. Separate control
Our machine adopts separate control technology, 1 switch, 1 SCR and 1 electric board controls 2pcs welding transformers, making the welding transformers working separately to reduce the capacity requirement of power transformer, reduce the impact current.
2. About the welding transformers
We use sealed air cooling welding transformer or water cooling welding transformers(high temperature countries), with copper inside, the scrap&slag won’t fly in easily while welding. Old type machine use no sealed welding transformers, with aluminum inside, easily burned.
3. About the button&speed meter
Our machine designed new position for the button&speed meter. It adopts Delta variable-frequency which can adjust frequency and save energy. They will not broken easily like before and be much easier to operate now.
Auxiliary Equipment
1. Mesh repairing table, 1 set
Usage: coincide with the mesh repairing machine and to hold the re-weld mesh | 2. Mesh repairing machine, 1 set
Usage: re-weld the points who was miss with misoperation situatio welding |
3. Bobbin stand-off, 1 set
| 4. Wire rolling machine, 1 set
|
